SECTION II: HULL AND CAB COMPONENTS
TM 9-2350-256-20
NOTE
Removal and installation procedures are the same for both left and right stowage compartment doors.
a.
REMOVAL
1
Remove handle (1) by removing cotter pin (2), nut (3), washer (4), and latch (5).
2
Remove rubber strip (6). Clean all dirt and adhesive from stowage compartment door (7).
3
Remove stowage compartment door (7) by removing two cotter pins (8), two washers (9), and two straight
pins (10).
NOTE
Step 4 applies only to right stowage compartment door.
Remove flow regulator setting instruction plate (11) from right stowage compartment door only if
illegible.
4
Remove flow regulator setting instruction plate (11) by removing four rivets (12).
9-55