SECTION III: ENGINE DECK, COVERS, GRILLES, AND DOORS
9-56 REPLACE AIR INLET DOORS
THIS TASK COVERS
Tool kit, general mechanic's (Appendix C, item 53)
Pins, cotter (10) (Appendix G, item 217)
Removal and installation procedures are the same for all five sets of air inlet doors.
Remove lock (1), screw (2), and flat washer (3).
Remove two cotter pins (4), two flat washers (5), two straight pins (6), and two air inlet doors (7).
Install two air inlet doors (7) each with straight pin (6), flat washer (5), and new cotter pin (4).
Install lock (1) with screw (2) and flat washer (3).