TM 9-2350-256-20
CHAPTER 9:
MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
9-63 SERVICE NONSLIP WALKWAY COATING
THIS TASK COVERS
a. Inspection
b. Painting
INITIAL SET-UP
Material:
Compound, walkway (Appendix D, item 32)
NOTE
In illustration, nonslip walkway coating areas are highlighted in gray
a. INSPECTION
1
Prior to application of compound, inspect finish on
areas to be painted for peeling, chipping, or
otherwise defective coating.
2
Replace parts where metal is badly tom, missing,
broken, cracked, or otherwise damaged.
b. PAINTING
Paint all areas indicated in illustration with nonslip
walkway compound.
Coating shall have a film
thickness of 0.03 to 0.06 in. (0.8 to 1.5 mm). (See
paragraph 2-11).
9-108
Change 1