CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-65 REPLACE/SERVICE COMMANDER'S SEAT ASSEMBLY
THIS TASK COVERS
a. Removal
b. Disassembly c. Inspection
d. Repair
e. Assembly
f. Installation
INITIAL SET-UP
Tools:
Parts:
Personnel Required:
Tool kit, general mechanic's
Lockwashers (10) (Appendix
Two
(Appendix C, item 53)
G, item 130)
Awl, saddler's sewing
Lockwashers (8) (Appendix G,
Equipment Condition:
Appendix C, item 2)
item 132)
Flasher light case removed (see
File, thread restorer (thread
Lockwashers (4) (Appendix G,
paragraph 9-102)
chaser) (Appendix C, item 13)
item 143)
Hammer, hand (mallet)
Pins, cotter (15) (Appendix G,
(Appendix C, item 16)
item 212)
WARNING
Commander's seat assembly is extremely heavy-two persons are required to lift it.
Be sure not to lift commander's seat assembly by seat adjusting lever or seat may spring up and
cause injury.
a. REMOVAL
Rotate commander's seat assembly (1) as necessary
to gain access to four screws (2). Remove four
screws, four lockwashers (3), and commander's seat
assembly.
b. DISASSEMBLY
1
Remove seat cushion (4) by unsnapping two
snaps (5).
2
Lift seat back (6) off seat body (7)
9-110