a. Removal. Refer to paragraph 2-21 or TM 9-
2350-256-20 for removal and installation instructions of
Unwrap or cut tape which binds the wires
or cables to the old harness.
Lay out the old harness with all splices
exposed, so that it can be used as a model for building
the new harness.
Tag or otherwise identify all wires or
Remove all cable connectors.
Shell and Terminal Assemblies. Refer to
A, B and C, figure 3-20.
Figure 3-20. Wiring harness cable connectors repair
(Sheet 1 of 2).
3-38 CHANGE 7