TM 9-2350-256-34-1
b. Installation.
Check cable level winding on winch drum by operating
winch and inspecting cable as it winds on drum. If cable
does not spool evenly and fully across the drum, adjust
level cylinder piston travel (TM 9-2350-256-20).
2-23. Hoist Winch Cable
a.
Removal Pay out cable (TM 92350-256-10) prior
to removing it from vehicle.
b
Installation. Refer to TM 9-2350-256-20 for
removal and installation instructions for hoist winch
cables.
2-24. Hoisting Boom Assembly
NOTE
LOAD TEST REQUIREMENT
a.
Load testing of hoist winch and boom is
mandatory, prior to use, under any of the
following conditions:
(1)
When new.
(2)
Following any repairs, disassembly
and assembly, adjustments, or parts
replacement, of hoist winch or boom.
(3)
When modifications are made that
could affect the strength or lifting
capabilities of the vehicle.
b.
Load testing will be accomplished by
support maintenance activities.
c.
Refer to TM 92350-256-34-2 for detailed
step-by-step procedure.
a.. Removal Remove the hoisting boom assembly
as shown in figure 2-21.
CHANGE 7 2-45