RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
PURGE PUMP TROUBLESHOOTING PROCEDURE
Tools and Special Tools
Purge pump malfunctioning.
Main engine manifold heaters do not work.
Do step 1.
Purge pump difficult to pump or does not pump. Do step 2.
Check manifold heater switch and associated wiring (TM 9-2350-256-20).
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and use in a well-ventilated area. If solvent gets on skin or
clothing, wash immediately with soap and water.
Disassemble purge pump (WP 0031 00). Clean all parts in paint thinner or cleaning compound. Inspect
all components for cracks, distortion, and/or evidence of excessive wear.
Replace all defective components.
END OF WORK PACKAGE
0006 00-1/2 blank