Remove engine wiring harness bracket (12) by removing two screws (13) and lockwashers (14). Discard lockwashers.
Prior to disconnecting transmission from engine, install lifting sling.
Disconnect transmission from engine by removing 24 nuts (15) and lockwashers (16). Discard lockwashers.
Using sling, remove transmission (17) from engine (18).
Remove and discard gasket (19).
Wash hoses and harnesses in a mild soap solution, rinse with clean water, and dry with compressed air.
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and use in a well-ventilated area. If solvent gets on skin or
clothing, wash immediately with soap and water.