• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Inspection-Acceptance and Rejection Criteria - TM-9-2350-256-340184
Assembly - TM-9-2350-256-340186

TM-9-2350-256-34 Recovery Vehicle Full Tracked: Medium M88A1NSN 2350-00-122-6826 (EIC AQA) Manual
Page Navigation
  144    145    146    147    148  149  150    151    152    153    154  
TM 9-2350-256-34
0033 00
(2) Male cable connector:
(a) Strip cable insulation equal to depth of terminal well.
(b) Slide shell over cable.
(c) Insert cable into terminal well, and crimp.
(d) Place C-washer over cable at crimped junction and slide shell over C-washer and terminal.
(3) Female cable connector (with sleeve):
(a) Strip cable insulation equal to depth of terminal well.
(b) Slide shell and sleeve over cable.
(c) Insert cable into terminal well, and crimp.
(d) Slide shell and sleeve over terminal.
(4) Plug assembly:
(a) Strip cable insulation equal to depth of solder wells of inserts.
(b) Pass cable ends through grommet retaining nut, grommet, and coupling nut; insert into solder wells of
inserts and solder (refer to TB SIG 222).
(c) Slide grommet over inserts and press into shell assembly until seated.
(d) Thread grommet retaining nut to shell assembly until seated.
0033 00-3






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.