TM 9-2350-256-34
0034 00
NOTE
Perform the following steps at left rear--engine compartment.
6.
Disconnect three leads (14) to taillight.
7.
Remove two screws (15), washers (16), and clamps (17).
8.
Remove screw (18), three lockwashers (19), and disconnect two ground cables (20). Discard lockwashers.
NOTE
Perform the following steps at left rear--engine compartment.
9.
Remove grommet (21) to pull connectors through hole and disconnect two leads (22) to rigger's infrared light (23).
10. Remove screw (24) and three lockwashers (25). Discard lockwashers.
11. Disconnect two harness leads (26) to slave receptacle.
12. Disconnect cable (27) at main engine generator armature relay (28).
0034 00-3