Loosen set screw on impact wrench adapter (6) and remove adapter from shaft end (5).
Install ratchet (3), washer (2), and cotter pin (1) to track fixture (4).
Refer to TM 9-2350-256-10 for installation of the tracks. To facilitate the installation of the tracks, disassemble the track
fixture as shown in DISASSEMBLY above. Use the hydraulic impact wrench with the track fixture and impact wrench
adapter to connect the tracks. Refer to TM 9-2350-256-10 for operating instructions on the hydraulic impact wrench.
Refer to TM 9-2350-256-20 for installation of hub and sprocket assemblies, compensating idler assemblies, road wheels
and hubs, torsion bars, road wheel arms, torsion bar anchors, road wheel arm housings, shock absorbers, bumper springs,
track support roller assemblies, and output reduction drives.
END OF WORK PACKAGE