Install two lifting eyes to hoist winch assembly (38) and attach sling to lifting eyes.
There are two methods of moving and securing the hoist winch assembly (38) into position: steps 2 thru
7 or steps 8 thru 10 (depending on how removed).
Using sling, lower hoist winch assembly (38) straight down thru cupola plate opening into position. Continue to support
weight of hoist winch assembly with sling.
Move cross support beam (46) into position.
Ensure marks made on shims (47) and cross support beam (46) match to ensure alignment of winch and
mechanical transmission mounting holes.
Install shims (47), eight lockwashers (49), and screws (48).