TM 9-2350-256-34
0055 00
Removal
NOTE
The flange-type hydraulic hoses (4), attaching hardware (1, 2, and 3), and packings (5) are hidden
between combination control valve (7) and vehicle wall.
1.
Remove eight screws (1), lockwashers (2), four flanges (3), and disconnect two flange-type hydraulic hoses (4). Discard
2.
Remove and discard two packings (5).
3.
Remove four screws (6) and combination control valve (7) (with four hydraulic lines attached) from counterbalance valve
(8). Place combination control valve on floor of vehicle.
4.
Remove and discard two packings (9) from combination control valve (7).
5.
Remove four screws (10) and counterbalance valve (8) from manifold (11).
6.
Remove and discard two packings (hidden) (12).
0055 00-2