Remove nut (1) and bolt (2) from clevis (3).
Remove clevis (3) from sleeve (4).
Remove tapered plug (5) and sleeve (4) from cable (6).
Remove zinc filling and ferrule (7) from drum end of cable (6).
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and use in a well-ventilated area. If solvent gets on skin or
clothing, wash immediately with soap and water.
Wash all parts in cleaning compound or paint thinner, and dry with moisture-free compressed air.
Inspection-Acceptance and Rejection Criteria
Unless otherwise specified, parts should be replaced if any of the defects described below are detected.
Inspect cable for kinks or broken strands.
Inspect clevis assembly and ferrule for distortion, cracks, and chipped surfaces.
Inspect all parts for nicks, burrs, rust, and corrosion. Remove rust, corrosion, burrs, and nicks with a fine file or crocus cloth.