29. Remove two screws (117), lockwashers (118), washers (119), and bracket (56). Discard lockwashers.
30. Remove two screws (120), lockwashers (121), and washers (122) separating bracket (56) from metal bar (123). Discard
31. Remove bleeder valve (124), split flange (125), 16 hydraulic fittings (126), and magnetic plug (127).
Perform step 32 to disassemble fittings (58) that were removed above. Note that the APU emergency
winch control valve (18) may have been already removed.
32. Remove two couplings (128), APU emergency winch control valve (18), elbow (129), tee (130), and nipple (131).
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and use in a well-ventilated area. If solvent gets on skin or
clothing, wash immediately with soap and water.
Wash parts, except seals and gaskets, in cleaning compound or paint thinner. Blow parts dry with moisture-free compressed
air; then immerse parts in clean oil to prevent rusting.