TM 9-2350-256-34
0079 00
1.
Remove four screws (1), lockwashers (2), two flanges (3), and disconnect hydraulic line (4) from subplate (5). Discard
lockwashers.
2.
Disconnect two hydraulic lines (6).
3.
Loosen two jamnuts (7), remove two cotter pins (8) and pin (9), and disconnect spade control cable (10). Discard cotter
pins.
4.
Disconnect hydraulic lines (11).
5.
Remove four screws (12), lockwashers (13), and subplate and control valve assembly (14) with brackets attached. Discard
lockwashers.
6.
Remove four socket head screws (15) and combination control valve (16).
7.
Remove and discard two packings (hidden) (17) and six packings (hidden) (18) from combination control valve (16).
Disassembly
1.
The following illustration, with its accompanying legend, serves to identify all subassemblies and attaching parts. The
step-by-step disassembly procedure is provided after this illustration:
0079 00-2