TM 9-2350-256-34
0081 00
2.
Loosen three nuts (7) and remove three adapter unions (8) and nuts from subplate (9).
3.
Loosen four nuts (10) and remove six adapter unions (11) and four nuts.
4.
Remove four flow regulators (12) and nipples (13) from subplate (9).
Cleaning
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and use in a well-ventilated area. If solvent gets on skin or
clothing, wash immediately with soap and water.
1.
Wash all parts in cleaning compound or mineral spirits paint thinner. Dry parts with moisture-free compressed air; then
immerse parts in clean oil to prevent rusting.
Inspection-Acceptance and Rejection Criteria
1.
Inspect all threaded parts for nicks, burrs, and cross-threading. Repair with a thread chaser.
2.
Inspect flow regulators for cracks or dented surfaces.
3.
Inspect fittings for nicks, burrs, cracks, or leakage. Remove burrs with a fine, hard sharpening stone.
0081 00-3