TM 9-2350-256-34
0083 00
4.
Remove two coupling halves (31), adapter (32), valve (33), elbow (34), tee (35), two nipples (36), adapter unions (37),
adapter (38), and two packings (hidden) (39) from auxiliary hydraulic pump (28). Discard packings.
5.
Disconnect lead (hidden) (40) and remove shell (hidden) (41).
6.
Remove screw (42) and washer (43) and disconnect ground lead (44).
7.
8.
Remove screw (46), four screws (47), and air inlet duct (48).
9.
Remove four nuts (49) and washers (50) and disconnect two leads (51), armature cable (52), and ground cable (53).
10. Remove screw (54) and washer (55) and disconnect lead (56).
11. Disconnect lead (57).
12. Remove four screws (58) and lockwashers (59) and disconnect four leads (60) from preheat solenoid (61). Discard
0083 00-9