TM 9--2350--292--10
0047 00--16
OPERATE BOOM -- CONTINUED
0047 00
LOCKOUT BLOCKS -- CONTINUED
Carrying load with lockout blocks installed -- Continued
CAUTION
Do not exceed maximum speeds. Exceeding maximum speeds could cause damage
to the equipment.
1. Maximum vehicle speed carrying 12,001 to 30,000 lbs (5,443 to13,620 kg) is 3 mph (5 kmph).
2. Maximum vehicle speed carrying 30,001 to 50,000 lbs (13,620 to 22,680 kg) is 2 mph (3 kmph).
Removing lockout blocks
1. Raise front of vehicle by driving up on spade (WP 0046 00).
2. Lock brakes and shut off engine.
3. Open side armor skirt panel #2 (WP 0102 00).
4. Remove lock screws (1), lockwashers (2) and flat washers (3) from lockout blocks (7) and bumper stop assembly
(5).
5. Remove lockout block (7) from bumper stop assembly (5).
6. Loosen screw (6) securing lockout block spacer (4) to bumper stop assembly (5). Place lockout block spacer (4)
in vertical position.
7. Install lock screws (1), lockwashers (2) and flat washers (3) through lockout block spacer (4) and into bumper stop
assembly (5). Tighten screw (6) securing lockout block spacer (4).
8. Close and secure side armor skirt panel #2 (WP 0102 00).
9. Start main engine and back vehicle off spade (WP 0046 00).
90
1
3
2
5
4
6
7
7
5
END OF TASK