TM 9--2350--292--10
BILGE PUMP TROUBLESHOOTING (WHEN INSTALLED)
0085 00
THIS WORK PACKAGE COVERS:
Bilge pump does not pump water
0085 00--1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bilge pump fails to operate
0085 00--1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INITIAL SETUP:
Personnel Required
Three
BILGE PUMP DOES NOT PUMP WATER
Step 1. Check for a clogged bilge pump inlet.
Remove obstruction from pump inlet. If failure is due to clogged pump screen, notify unit maintenance.
Step 2. Check for a clogged bilge pump vent.
Remove obstruction from pump vent.
Step 3. If problem still exists, notify unit maintenance (BILGE PUMP FAILS TO OPERATE).
BILGE PUMP FAILS TO OPERATE
Step 1. Reset bilge pump circuit breaker switch on Accessory/PTO panel.
Step 2. If problem still exists, notify unit maintenance (BILGE PUMP FAILS TO OPERATE).
END OF TASK
0085 00--1/2 blank