• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
TABLE 1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, BEFORE (cont) - TM-9-2350-292-10_286
TABLE 1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, BEFORE (cont) - TM-9-2350-292-10_288

TM-9-2350-292-10 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
  260    261    262    263    264  265  266    267    268    269    270  
TM 9--2350--292--10 0101 00--13 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS -- CONTINUED 0101 00 TABLE 1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, BEFORE--CONTINUED Item No. Not Fully Mission Capable If: CREWMEMBER Procedure LOCATION Item to Check/ Service Interval DRIVER WARNING Make sure steering wheel is centered and locked. Vehicle may move during engine starting causing injury to per- sonnel. 11 Before Gauge Panel Engine must be started and operated at normal temperature to check gauges. Start engine (WP 0012 00). Any gauge is missing, fluctuating or inoperative. GAUGE PANEL 3 1 4 2 NOTE Engine may take longer to warm--up depending on climatic conditions. Check all gauges on gauge panel for damage and the following gauges for indicators of normal operations: a. Engine oil PRESS gauge (1) normal pressure range 40--70 psi (276 kPa -- 483 kPa) at 2400 rpm and 180 F (82 C) oil temperature. b. TRANSMISSION oil PRESS gauge (2) normal pressure 17 psi (117 kPa). c. BATT-GEN gauge (3) normal indication -- green zone for generator or yellow zone for batteries. d. Tachometer (4) should operate normally without excessive fluctuations or unusual noises. BATT/GEN gauge not in green zone.







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.