TM 9--2350--292--10
0101 00--77
PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING
LUBRICATION INSTRUCTIONS -- CONTINUED
0101 00
TABLE 6 LUBRICATION INSTRUCTIONS -- CONTINUED
9. MAIN WINCH OIL LEVEL CHECK
Park vehicle on a level surface. Remove three screws,
three flat washers and subfloor access plate. Remove
bayonet gauge, wipe clean, insert, remove again and
verify oil level reachs FULL mark.
To add oil to main winch, remove the bayonet gauge,
install a funnel (item 15, Table 2, WP 0128 00) in the tube
and add the proper grade oil (WP 0101 00--65). Check oil
level with the bayonet gauge. Add oil until the oil level
reaches the full mark. Remove the funnel and install the
bayonet gauge.
BAYONET GAGE
SUBFLOOR
ACCESS PLATE