TM 9--2350--292--10
0102 00--4
OPENING, REMOVAL, INSTALLATION AND CLOSING OF ARMOR SKIRT
PANELS -- CONTINUED
0102 00
INSTALLATION OF ARMOR SKIRT PANELS -- CONTINUED
3. Install two screws (4) into two stand--offs (5) to secure two hinge pins (6). Disconnect chain hoist, and stow.
CLOSING ARMOR SKIRT PANELS
Panels #2 through #7.
CAUTION
Do not use steel hammer or punch when installing hinge pins. Metal to metal contact
will mushroom hinge pin making it impossible to remove pin. Failure to comply may
result in damage to equipment.
1. Close panel against stand--offs.
2. Using hammer and brass drift, install two hinge pins (6) into two panel hinges (7) and two stand--offs (5).
3. Install two screws (4) into two stand--offs (5) to secure hinge pins (6).
4
4
6
4
7
7
5
5
8
7