TM 9--2350--292--10
TRACK ADJUSTING LINK GREASE FITTING REPLACEMENT
0107 00
THIS WORK PACKAGE COVERS:
Replacement
INITIAL SETUP:
Tools and Special Tools
Lubrication fitting tool (item 23, Table 2, WP 0128 00)
Materials/Parts
Wiping rags (item 45, WP 0130 00)
Personnel Required
Three
References
WP 0128 00
WP 0130 00
WP 0104 00
WP 0103 00
WP 0105 00
WP 0106 00
Equipment Conditions
Track tension relesed (WP 0105 00 or WP 0106 00)
NOTE
Replacement of track adjusting link grease fitting is the same for both sides.
1. Using lubrication fitting tool (1), remove grease fitting (2) from track adjusting link (3).
2. Clean area around grease fitting (2) with clean rag.
3. Loosely install new grease fitting (2) into track adjusting link (3). Using lubrication fitting tool (1), tighten new
grease fitting (2).
4. Adjust track tension (WP 0103 00 or WP 0104 00).
NOTE: SKIRTS AND IDLER WHEEL
REMOVED FOR CLARITY
1
2
3
END OF TASK
0107 00--1/2 blank