TM 9--2350--292--10
0111 00--4
AIR CLEANER MAINTENANCE -- CONTINUED
0111 00
SERVICING FILTER ELEMENTS -- CONTINUED
8. Shake filter element (7) slightly before removing from water.
9. Rinse filter element (7) with clean water (not more than 10 psi) from inside out.
10. Shake filter element (7) lightly to remove excess water.
11. Set filter element (7) aside in a dust free area to dry or circulate heated air at no more than 150°F (65°C).
12. Wipe the inside of the air filter housing (8) with a clean, damp cloth.
13. Before putting filter element (7) back, inspect it for tears or holes. If any are found, replace filter element (7).
14. Use a sharp pointed tool to scribe the date the filter was cleaned on the bottom of the filter element (7).
15. Install filter element (7) and hand tighten filter element wingnut (6).
16. Install dust cover baffle (5) and hand tighten wingnut (3).
17. Install dust cover (2) and hand tighten four wingnut clamps (1).
18. Reset restriction gauge in accordance with this work package.
2
4
3
5
6
1
7
8
END OF TASK