TM 9--2350--292--20--1
0226 00--3
ACCELERATOR CONTROLS AND LINKAGE REPAIR -- CONTINUED
0226 00
Removal--Continued
14. Remove four screws (37), four nuts (38), four lockwashers (39), four flat washers (40), two pillow blocks (41) and
shaft (29). Discard lockwashers.
15. Loosen two setscrews (42) on each of two pillow blocks (41).
16. Remove shaft (29) from two pillow blocks (41).
17. Remove two lubrication fittings (43) from two pillow blocks (41).
18. Remove two screws (44), two nuts (45), two lockwashers (46) and bracket assembly (23). Discard lockwashers.
19. Remove three screws (47), three lockwashers (48) and bracket (49). Discard lockwashers.
20. Remove three screws (50), three lockwashers (51), three flat washers (52) and angle (53). Discard lockwashers.
Figure 35
37
46
45
47
48
44
23
42
43
40
39
38
41
42
29
43
37
50
51
52
53
49
38
39
40
41