TM 9--2350--292--20--1
0230 00--6
HYDRAULIC OIL COOLER AND RELATED PARTS REPAIR -- CONTINUED
0230 00
Installation
1. Connect two hydraulic lines (34) onto bulkhead adapters (35).
2. Secure two hydraulic lines (34) with new electrical tiedown straps (36) as required.
3. Install two quick--disconnect couplings (33) onto two hydraulic lines (34).
4. Install two quick--disconnect couplings (32) onto tees (16).
5. Connect two hydraulic lines (31) onto tees (16).
NOTE
Left heat shield is installed with one new lockwasher and
one screw.
6. Install right heat shield (30) with two new lockwashers (29) and two screws (28).
7. Install bracket (27) with two new lockwashers (26) and two screws (25).
8. Connect two hydraulic lines (4) onto tees (16).
9. Secure two hydraulic lines (4) and two hose sleeves (24) with two clamps (21), flat washer (20), new lockwasher
(18), screw (19), nut (17) and four new electrical tiedown straps (23).
Figure 38
4
4
16
17
18
19
20
21
16
21
23
23
23
23
24
24
25
26
27
28
29
30
31
31
32
32
33
33
34
34
35
35
36
22