TM 9--2350--292--20--1
0262 00--1
REAR SERVICE LIGHTS TOGGLE SWITCH AND IDENTIFICATION PLATE
REPLACEMENT
0262 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (2) (item 111, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
References
TM 9--2350--292--10
NOTE
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
Removal
1. Remove two screws (1), two lockwashers (2) and electrical retainer (3) from main bulkhead (4). Discard lock-
washers.
2. Disconnect wiring harness 4W105 wire 16 (5) and wiring harness 4W700 wire 17 (6) from toggle switch (7).
3. Remove two screws (8), identification plate (9) and toggle switch (7) from electrical retainer (3).
4. Inspect parts for damage and replace as required.
Figure 76
4
2
1
3
9
8
7
5
6