TM 9--2350--292--20--1
0279 00--1
REAR SERVICE LIGHT REPAIR
0279 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwasher (item 202, WP 0718 00)
Preformed packing (item 328, WP 0718 00)
Gasket (item 329, WP 0718 00)
Preformed packings (2) (item 330, WP 0718 00)
Lockwasher (item 90, WP 0718 00)
Grommet (item 348, WP 0718 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
References
TM 9--2350--292--10
Removal
NOTE
There are two service lights on the rear of the vehicle.
This procedure applies to either service light.
1. Remove wiring harness 3W702 wire 17 (1) from service light assembly (2).
2. Remove connector (3) from service light assembly (2).
3. Remove dummy connector plug (4) from connector (3).
4. Remove nut (5), lockwasher (6), finishing washer (7), recessed washer (8) and service light assembly (2) from
vehicle. Discard lockwasher.
5. Remove grommet (9) from vehicle hull. Discard grommet.
Figure 89
1
3
4
9
7
6
5
8
2