TM 9--2350--292--20--1
0279 00--2
REAR SERVICE LIGHT REPAIR -- CONTINUED
0279 00
Disassembly
1. Loosen four captive screws (10), remove lens assembly (11) and preformed packing (12) from body (13). Discard
preformed packing.
2. Loosen four captive screws (14), remove plate assembly (15), lens (16) and gasket (17) from door assembly (18).
Discard gasket.
3. Loosen three captive screws (19), remove plate assembly (20) from body (13).
4. Remove lamp (21) from connector assembly (22).
5. Remove two screws (23) securing connector plate assembly (24) to body (13).
6. Pull connector plate assembly (24) away from body (13), disconnect two leads of connector assembly (22) from
connector plate assembly (24) and remove two preformed packings (25). Discard preformed packings.
7. Remove four screws (26) securing mount (27) to body (13).
8. Pull mount (27) out of body (13), remove screw (28), lockwasher (29) and ground lead of connector assembly (22)
from mount (27). Discard lockwasher.
9. Inspect parts for damage and replace as required.
Figure 89
11
18
10
17
16
15
14
12
13
19
20
21
22
28
29
27
26
25
25
24
23