TM 9--2350--292--20--1
0280 00--5
TROUBLE LIGHT ASSEMBLY REPAIR -- CONTINUED
0280 00
Assembly--Continued
8. Install shell (22) to pistol grip handle (23) with four screws (20) and four new lockwashers (21).
9. Install saddle bracket assembly (27) to shell (22) with two screws (24), two new lockwashers (25) and two nuts
(26).
10. Position lamp (16) in metal molding (14) and secure with three wire clips (17).
11. Connect lamp socket (15) to lamp (16) in metal molding (14).
12. Install metal molding (14) to shell (22) with screw (13).
13. If previously removed, attach nameplate (11) in same location on cord reel (12) as before. Use adhesive to fasten
nameplate (11) to cord reel (12).
14. Install spring bracket assembly (7) with screw (10), new lockwasher (9) and nut (8).
15. Position pistol grip light (6) on spring bracket assembly (7) and fasten with thumbscrew (5).
Figure 91
5
6
7
8
9
10
11
12
15
14
17
17
17
13
16
22
23
27
24
25
26
21
20