TM 9--2350--292--20--1
0289 00--1
BATTERY TRAY CLEANING TUBES REPLACEMENT
0289 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (8) (item 9, WP 0718 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
Personnel Required
Two
References
TM 9--2350--292--10
NOTE
Procedures to remove and install either of the four clean-
ing tubes are identical.
If necessary, remove battery opposite cleaning tube to
gain access to cleaning tube mounting hardware.
Removal
1. Remove two screws (1), two lockwashers (2), two clamps (3) and tube (4). Discard lockwashers.
2. Inspect parts for damage and replace as required.
Figure 102
BATTERIES REMOVED
FOR CLARITY
4
3
3
2
2
1
1