TM 9--2350--292--20--1
0326 00--1
LEAD ASSEMBLY 4W140 REPLACEMENT
0326 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (3) (item 132, WP 0718 00)
Lockwashers (5) (item 58, WP 0718 00)
Grommet (item 331, WP 0718 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
Subfloor plate #13 removed (WP 0454 00)
Subfloor plates #17 and #18 opened (WP 0454 00)
Stowage baskets #2, #6 and #7 removed (WP
0465 00)
References
TM 9--2350--292--10
Removal
1. Disconnect lead assembly 4W140 connector P1 (1) from wiring harness 4W100 connector J2 (2) at mounting
bracket (3).
2. Remove screw (4), two lockwashers (5) and lead assembly 4W140 450A (6) from circuit breaker (7). Discard
lockwashers.
3. Remove five screws (8), five lockwashers (9) and five cable clamps (10). Discard lockwashers.
4. Remove lead assembly 4W140 (11) and grommet (12) from the cable chute base subfloor plate (13). Discard
grommet.
5. Inspect parts for damage and replace as required.
Figure 139
A
B
C
D
4
5
5
6
7
1
2
3
8
9
10
B
A
A
D
C
11
12
13