TM 9--2350--292--20--1
0335 00--1
ELECTRICAL CABLE CLAMPS REPLACEMENT
0335 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Marker tags (item 49, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
References
TM 9--2350--292--10
NOTE
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
There are four electrical cable clamps on the vehicle.
This task replaces only one cable clamp.
Removal
1. Remove two screws (1) in electrical cable clamp (2) and disconnect wires (3), if applicable.
2. Remove nonmetallic rod (4) from electrical cable clamp (2).
3. Remove wiring harness connector (5).
4. Remove electrical cable clamp (2) from vehicle.
5. Inspect parts for damage and replace as required.
Figure 14
FRONT
1
1
2
3
3
4
5
2
2
2
2