TM 9--2350--292--20--1
0043 00--6
ENGINE CRANKS BUT WILL NOT START IN COLD WEATHER
0043 00
Is continuity present?
N
no
yes
1. Disconnect harness 4W109 J3 lead 530 from
CB4.
2. Place one multimeter lead on pin L of harness
4W109 J3 and other lead in lead 530 CB4
connector socket. Check for continuity.
O
CONTINUED FROM STEP M
1. Hold ENGINE PREHEAT switch ON
(TM 9--2350--292--10).
2. Place one multimeter lead on pin D of harness
4W109 J3 and other lead on pin L. Check for
continuity.
3. Release ENGINE PREHEAT switch
(TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0242 00) lead
530 to circuit breaker.
Verify fault is corrected.
no
yes
CONTINUED ON NEXT PAGE
Repair (WP 0290 00) or
replace (WP 0316 00)
harness 4W103. Verify
fault is corrected.
Is continuity present?