TM 9--2350--292--20--1
0051 00--2
ENGINE USES EXCESSIVE FUEL -- CONTINUED
0051 00
CONTINUED FROM STEP B
Check results of 10--second crank.
no
yes
Go to Step F.
C
Is VTM reading at least 6 psi?
D
Does VTM show PASS?
no
yes
Does engine start and is pressure above zero?
no
yes
Replace mechanical fuel
pump (WP 0206 00).
Verify fault is corrected.
E
Notify Direct Support Maintenance.
1. Replace fuel/water separator elements
(WP 0220 00).
2. Perform Step B again.
no
yes
F
Is VTM reading between 60 and 90 psi?
1. Enter 26 into TEST SELECT.
2. Start engine (TM 9--2350--292--10) and set
engine speed to 2600--2660 rpm.
3. Press and release TEST and record results.
4. Shut down engine (TM 9--2350--292--10).
Replace fuel/water separator
elements (WP 0220 00).
Verify fault is corrected.
CONTINUED FROM STEP C
Go to Step I.
CONTINUED ON NEXT PAGE
CONTINUED FROM STEP B