TM 9--2350--292--20--1
0087 00--1
HYDRAULIC OIL CONSTANTLY OVERHEATS
0087 00
THIS WORK PACKAGE COVERS:
Hydraulic Oil Constantly Overheats
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
1--inch cap (item 99, WP 0716 00)
1--inch plug (item 100, WP 0716 00)
1--inch tee (item 75, WP 0716 00)*
3/4--inch tee (item 74, WP 0716 00)*
0--3000 psi dial pressure gauges (2) Iitem 81,
WP 0717 00)
Safety goggles (item 93, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Subfloor plates 22, 28, 29 and 30 removed
(WP 0454 00)
Engine deck removed (WP 0417 00)
Personnel Required
Two
*Not required if vehicle is equipped with Enhanced
diagnostics System
Are all hoses, fittings, and quick--disconnects properly
connected and free of damage and leakage?
Inspect all hydraulic oil cooler hoses, fittings, and
quick--disconnects for proper connection, leakage,
and damage.
no
yes
no
yes
A
B
CONTINUED ON NEXT PAGE
Inspect hydraulic oil coolers for air restricting
obstructions.
Are oil coolers free of obstructions?
Repair or replace damaged
and/or leaking hoses,
fittings, and quick--
disconnects and properly
connect (WP 0230 00).
Verify fault is corrected.
Clear obstructions.
Verify fault is corrected.
WARNING
Remove rings, bracelets, wristwatches, and
neck chains before working on any vehicle.
Jewelry can catch on equipment and cause
injury, or may short across an electrical circuit
and cause severe burns or electrical shock.
WARNING
FORWARD