SLOW OR NO HYDRAULIC COMPONENT OPERATION WITH HYDRAULIC
SELECTOR SET IN MAIN POSITION -- CONTINUED
Are all hoses free of leaks, restrictions, and damage?
CONTINUED FROM STEP T
CONTINUED ON NEXT PAGE
Inspect the following hoses for leaks, restrictions,
and damage: hose from boom directional control
valve to boom shutoff valve port A; hose from boom
directional control valve to center pump port X3;
hose from boom shutoff valve to both check valves,
and hose from check valve to center pump port B3.
Tighten leaking connec-
tions and remove re-
strictions. If restrictions
cannot be removed, or if
hoses are damaged, re-
place (WP 0565 00 and
WP 0576 00). Verify
fault is corrected.
Does hoist and main winch operate?
Perform Step R attempting to operate hoist and
CONTINUED FROM STEP R
Notify Direct Support