TM 9--2350--292--20--1
0098 00--1
BOOM CREEPS WITH BOOM CONTROL IN NEUTRAL
0098 00
THIS WORK PACKAGE COVERS:
Boom Creeps With Boom Control in Neutral
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
0--4000 psi testing gauge assembly (item 82, WP
0717 00)
Safety goggles (item 93, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Personnel Required
Two
*Not required if vehicle is equipped with Enhanced
Diagnostics System
Does boom drift in stow range?
1. Operate the boom (TM 9--2350--292--10).
2. Release boom control handle while in the live
range and observe boom.
3. Place boom control handle in the stow position
and when boom is in stow range release
control handle and observe boom.
no
yes
A
Go to Step C.
WARNING
WARNING
Remove rings, bracelets, wristwatches, and
neck chains before working on any vehicle.
Jewelry can catch on equipment and cause
injury, or may short across an electrical circuit
and cause severe burns or electrical shock.
no
yes
B
Go to Step G.
Is vehicle equipped with Enhanced Diagnostic
System?
Go to Step J.
CONTINUED ON NEXT PAGE