TM 9--2350--292--20--1
0098 00--2
BOOM CREEPS WITH BOOM CONTROL IN NEUTRAL -- CONTINUED
0098 00
no
yes
C
1. Start the main engine, energize hydraulics
system, and set engine speed to 1800 rpm
(TM 9--2350--292--10).
2. Retract boom until boom is over center in the
stow range and place control handle in hold
position.
3. Shut down hydraulics system and main engine
(TM 9--2350--292--10).
Does boom drift continuously until in travel lock?
Notify Direct Support
Maintenance.
FORWARD
CONTINUED FROM STEP A
CONTINUED ON NEXT PAGE