TM 9--2350--292--20--1
0100 00--2
HOIST WINCH FAILS TO OPERATE OR DEVELOP FULL POWER --
CONTINUED
0100 00
CONTINUED FROM STEP A AND B
Does main winch operate properly?
Operate the main winch (TM 9--2350--292--10).
no
yes
no
yes
C
D
CONTINUED ON NEXT PAGE
1. Remove subfloor plates 18, 20 and 22
(WP 0454 00).
2. Inspect hoist and main winch directional control
valve assembly hoses for leaks, loose
connections, and damaged hoses and fittings.
Are both hoses free of leaks, loose connections, and
damage?
Go to WP 0087 00.
Tighten loose and leaking
connections. If hoses or
connectors are damaged,
replace hoses or connectors
(WP 0572 00 or WP 0573 00).
Verify fault is corrected.
FORWARD
Is vehicle equipped with Enhanced Diagnostic
System?
no
yes
E
Go to Step I.