TM 9--2350--292--20--1
0114 00--1
GAUGE PANEL LIGHTS FAIL TO OPERATE.
0114 00
THIS WORK PACKAGE COVERS:
Gauge Panel Lights Fail to Operate
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Personnel Required
Two
CONTINUED ON NEXT PAGE
1. Remove three gauge panel lights and lens
(TM 9--2350--292--10).
2. Turn MASTER switch and gauge panel lights
switch ON (TM 9--2350--292--10).
3. Place red multimeter on lamp socket contact
pin and black lead to ground. Check all three
lamp sockets for voltage (one at a time).
4. Turn MASTER switch and gauge panel lights
switch OFF (TM 9--2350--292--10).
no
yes
Remove gauge
panel ground
strap and clean
mounting sur-
faces. Reinstall
ground strap
(WP 0243 00).
Verify fault is
corrected.
A
1. If 24 V dc is not present at
any lamp socket, proceed
to step B.
2. If 24 V dc is present at
one or more lamp sockets,
but not all, perform
numbers 1 and 2 of step B
then proceed to Step I.
Is 24 V dc present at all lamp sockets?
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.