TM 9--2350--292--20--1
0129 00--7
FUEL GAUGE FAILS TO OPERATE PROPERLY -- CONTINUED
0129 00
L
Is 24 V dc present?
CONTINUED FROM STEPS G AND K
no
yes
CONTINUED ON NEXT PAGE
1. If disconnected, reconnect lead 25/27 to CB6 in
switch panel, reconnect harness 4W105 P1 to
switch panel and harness 4W103 P1 to gauge
panel.
2. Disconnect lead 27 from fuel level gauge inside
gauge panel.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place multimeter red lead in lead 27 gauge
connector socket and black lead to ground.
Check for voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0243 00)
lead 27. Verify fault is
corrected.