TM 9--2350--292--20--1
0133 00--4
TRANSMISSION OIL TEMPERATURE GAUGE FAILS TO OPERATE --
CONTINUED
0133 00
CONTINUED FROM STEP G
CONTINUED ON NEXT PAGE
H
Is continuity present?
no
yes
1. Disconnect harness 4W103 P1 from gauge
panel.
2. Place one multimeter lead on harness
4W152 J1 pin E and other lead in lead 324
temperature connector socket. Check for
continuity.
Repair (WP 0290 00) or
replace (WP 0243 00)
lead 324. Verify fault is
corrected.
I
Is 24 V dc present?
no
yes
1. Reconnect lead 324 to temperature gauge.
2. Reconnect harness 4W103 P1 to gauge panel.
3. Open air intake grilles above battery
compartment (TM 9--2350--292--10).
4. Disconnect harness 3W143 P2 from bulkhead
connector.
5. Turn MASTER switch ON
(TM 9--2350--292--10).
6. Place multimeter red lead in harness 3W143
P2 receptacle socket E and black lead to
ground. Check for voltage.
7. Turn MASTER switch OFF
(TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0316 00)
harness 4W103. Verify
fault is corrected.