TM 9--2350--292--20--1
TRANSMISSION OIL PRESSURE GAUGE FAILS TO OPERATE -- CONTINUED
0134 00
CONTINUED FROM STEP I
J
Is 24 V dc present?
no
yes
1. Reconnect lead 321 to gauge.
2. Reconnect harness 4W103 P1 to gauge panel.
3. Open air intake grilles above battery
compartment (TM 9--2350--292--10).
4. Disconnect harness 3W143 P2 from bulkhead
disconnect.
5. Turn MASTER switch ON
(TM 9--2350--292--10).
6. Place multimeter red lead on harness 3W143
P2 receptacle socket M and black lead to
ground. Check for voltage.
7. Turn MASTER switch OFF
(TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0316 00)
harness 4W103. Verify
fault is corrected.
K
Is 24 V dc present?
no
yes
1. Reconnect harness 3W143 P2 to bulkhead
disconnect.
2. Disconnect harness 3W143 P1 from engine
disconnect.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place multimeter red lead in harness 3W143
P1 socket T and black lead to ground. Check
for voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0295 00)
harness 3W143. Verify
fault is corrected.
Repair (WP 0290 00) or
replace (WP 0300 00)
harness 3W202. Verify
fault is corrected.
END OF TASK
0134 00--5/6 blank