TM 9--2350--292--20--1
0135 00--1
TRANSMISSION FILTER CLOGGED INDICATOR FAILS TO LIGHT WHEN
FILTER IS CLOGGED.
0135 00
THIS WORK PACKAGE COVERS:
Transmission Filter Clogged Indicator Fails To Light When Filter Is Clogged
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Lamp replaced (TM 9--2350--292--10)
Engine access doors open (TM 9--2350--292--10)
Personnel Required
Two
Does indicator light?
1. Turn MASTER switch ON
(TM 9--2350--292--10).
2. Hold LAMP TEST switch on PTO panel in
TEST position (TM 9--2350--292--10).
3. Watch TRANSMISSION FILTER CLOGGED
indicator.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
no
yes
CONTINUED ON NEXT PAGE
Replace lamp socket
(WP 0245 00). Verify
fault is corrected.
Is 24 V dc present?
1. Remove lamp from TRANSMISSION FILTER
CLOGGED indicator (WP 0245 00).
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Place red multimeter lead in lamp socket and
black lead to ground. Check for voltage.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
no
yes
A
Go to Step C.
B
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.