TM 9--2350--292--20--1
0150 00--1
EXCESSIVE INTERFERENCE WHEN VEHICLE IS TRAVELING.
0150 00
THIS WORK PACKAGE COVERS:
Excessive Interference When Vehicle Is Traveling
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Personnel Required
Two
Is interference heard?
1. Open vehicle skirt panels and remove hubcaps
from roadwheels (WP 0387 00), compensating
idlers (WP 0394 00) and track support rollers
(WP 0391 00).
2. Inspect static suppression spring in each
hubcap. Replace broken or missing springs
and install hubcaps.
3. Close vehicle skirts, start engine, turn radio
ON and drive vehicle (TM 9--2350--292--10).
Listen for interference.
4. Stop vehicle, turn radio OFF and shut down
engine (TM 9--2350--292--10).
A
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
NOTE
If interference is a clicking sound,
complete Step A. If interference is a
scratching or popping sound that
stops when vehicle stops running go
to Step B.
yes
no
Fault corrected.
Notify Direct Support
Maintenance.
CONTINUED ON NEXT PAGE