TM 9--2350--292--20--1
0179 00--2
LEVEL WINDER MALFUNCTION INDICATOR FAILS TO LIGHT WHEN LEVEL
WINDER MALFUNCTIONS -- CONTINUED
0179 00
C
Is 24 V dc present at both checks?
CONTINUED FROM STEP B
no
yes
CONTINUED ON NEXT PAGE
1. Turn MASTER switch ON
(TM 9--2350--292--10).
2. Place multimeter red lead on accessory control
panel receptacle J1 pin S and H (one at a time)
while holding black lead to ground. Check for
voltage.
3. Turn MASTER switch OFF
(TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0291 00)
harness 2W601. Verify
fault is corrected.
D
Is 24 V dc present at both checks?
no
yes
1. Disconnect harness 2W601 J1 from harness
2W602 P1.
2. Reconnect harness 2W601 P1 to accessory
control panel.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place red multimeter lead on harness 2W601
J1 socket C and D (one at a time) while holding
black lead to ground. Check for voltage.
5. Turn MASTER swtich OFF
(TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0291 00)
harness 2W601. Verify
fault is corrected.