TM 9--2350--292--20--2
0635 00--4
AUXILIARY POWER UNIT GENERATOR REPLACEMENT (HATZ) --
CONTINUED
0635 00
Inspection
1. Inspect generator mounting studs (27) for stripped, bent or broken studs. Replace any stud
(WP 0637 00) that is unserviceable.
2. Inspect gear hub (28) in chaincase (25) for damage. Notify support maintenance, if unserviceable.
Installation
1. Loosely install six flat washers (26) and six new self--locking nuts (24) on six generator mounting studs (27).
28
25
27
26
24
CAUTION
To avoid damage to generator shaft or chaincase gear
hub, do not force shaft into gear hub.
Generator weighs approximately 94 lbs (43 kg). To pre-
vent damage to shaft and seals, generator must be sup-
ported at all times when performing the following proce-
dures.