TM 9--2350--292--20--2
0667 00--29
DEEP WATER FORDING KIT -- CONTINUED
0667 00
Removal--Continued
REMOVAL OF NON--HYGROSCOPIC TAPE (ELECTROMAGNETIC CLUTCH AND HYDRAULIC RESERVOIR)
1. Open subfloor access door (1).
2. Remove tape and adhesive from bayonet gauge (2) and vent (3).
3. Close subfloor access door (1).
4. Remove two screws (4), two flat washers (5) and open hydraulic reservoir access plate (6).
5. Remove tape and adhesive from fill cap (7) and bayonet gauge (8).
6. Close hydraulic reservoir access plate (6) and secure with two screws (4) and two flat washers (5).
Figure 355
1
2
3
4
5
6
7
8